滿額折
Chemical Engineering Dynamics - An Introduction To Modelling And Computer Simulation 3E +Cd
商品資訊
定價
：NT$ 18000 元優惠價
：90 折 16200 元
若需訂購本書，請電洽客服 02-25006600[分機130、131]。
相關商品
商品簡介
作者簡介
名人/編輯推薦
目次
商品簡介
In Chemical Engineering Dynamics, the modelling of dynamic chemical engineering processes is presented in a highly understandable way using the unique combination of simplified fundamental theory and direct hands-on computer simulation. The mathematics is kept to a minimum, and yet the nearly 100 examples supplied on a CD-ROM illustrate almost every aspect of chemical engineering science. Each example is described in detail, including the model equations. They are written in the modern user-friendly simulation language Berkeley Madonna, which can be run on both Windows PC and Power-Macintosh computers.
Madonna solves models comprising many ordinary differential equations using very simple programming, including arrays. It is so powerful that the model parameters may be defined as "sliders", which allow the effect of their change on the model behavior to be seen almost immediately. Data may be included for curve fitting, and sensitivity or multiple runs may be performed. The results can be seen simultaneously on multiple-graph windows or by using overlays. The resultant learning effect of this is tremendous. The examples can be varied to fit any real situation, and the suggested exercises provide practical guidance.
The extensive experience of the authors, both in university teaching and international courses, is reflected in this well-balanced presentation, which is suitable for the teacher, the student, the chemist or the engineer. This book provides a greater understanding of the formulation and use of mass and energy balances for chemical engineering, in a most stimulating manner.
This book is a third edition, which also includes biological, environmental and food process examples.
Madonna solves models comprising many ordinary differential equations using very simple programming, including arrays. It is so powerful that the model parameters may be defined as "sliders", which allow the effect of their change on the model behavior to be seen almost immediately. Data may be included for curve fitting, and sensitivity or multiple runs may be performed. The results can be seen simultaneously on multiple-graph windows or by using overlays. The resultant learning effect of this is tremendous. The examples can be varied to fit any real situation, and the suggested exercises provide practical guidance.
The extensive experience of the authors, both in university teaching and international courses, is reflected in this well-balanced presentation, which is suitable for the teacher, the student, the chemist or the engineer. This book provides a greater understanding of the formulation and use of mass and energy balances for chemical engineering, in a most stimulating manner.
This book is a third edition, which also includes biological, environmental and food process examples.
作者簡介
John Ingham is now retired from Chemical Engineering at Bradford University U.K. The first of a long series of courses on the Modelling and Simulation of Dynamical Chemical Engineering Systems was begun there in 1974, sponsored by the Institution of Chemical Engineers and inspired by leave of absence at the ETH Zurich. Research areas include Liquid-Liquid Column Hydrodynamics, Extraction Process Dynamics and Biochemical Engineeering; the latter, being developed, during a further leave of absence at the GBF, Braunschweig. He is especially proud of this and the two other VCH-Wiley Modelling and Simulation books.
Irving J. Dunn is retired from the ETH-Zurich, where he taught and did research in the area of biochemical engineering for over thirty years, within the Chemical Engineering Dept. His degrees are from the University of Washington and Princeton University. Dr. Dunn has published widely in his field, ranging from bioreactor design, process control, animal cell culture, and specialized wastewater treatment. His teaching and research has featured the use of modelling and simulation and has resulted in the publication of three textbooks: Biological Reaction Engineering, Environmental Bioprocesses and Chemical Engineering Dynamics.
Elmar Heinzle chairs Biochemical Engineering at the Saarland University in Saarbrucken, Germany. Having obtained his academic degrees from the Technical University of Graz, Austria, he spent most of his career at the Chemical Engineering Department of ETH-Zurich, Switzerland, before taking his present appointment. Professor Heinzle published over 200 scientific publications in bioreactor design, metabolic engineering, on-line analysis and control and design of sustainable processes. In his teaching in Biochemical and Chemical Engineering he is extensively using modelling. He has authored several books in these fields.
Jonathan B. Snape is Commercial Director of Mylnefield Research Services Ltd, the commercial subsidiary of the Scottish Crop Research Institute, a leading international centre for plant and environmental sciences. Dr Snape studied Biochemistry at the University of Cambridge and Biochemical Engineering at the University of Birmingham before undertaking post-doctoral research in Switzerland, Japan and Germany. His career also encompasses industrial experience with Unilever and IBM and was recently awarded an MBA by the University of Strathclyde.
Jiri E. Prenosil was born 1939 in Prague, Czechoslovakia. Educated in Prague with PhD in Chemical Engineering, he worked in the Czechoslovak Academy of Science and various universities abroad. 1971 he moved to Switzerland with appointment at the Swiss Federal Institute of Technology (ETH) in Zurich. 1984 he was a Visiting Professor at the University of London, Canada. His life interest is in Biochemical Engineering, design and modelling of bioreactors with immobilized biocatalysts. It has resulted in over 100 publications and co-authorship of two other books in this area. He is a co-founder of the renowned International Modelling and Simulation Courses in Braunwald, Switzerland since 1981. 1997 he was granted the Swiss Technology Transfer Award. In 2006, he retired from the ETH.
Irving J. Dunn is retired from the ETH-Zurich, where he taught and did research in the area of biochemical engineering for over thirty years, within the Chemical Engineering Dept. His degrees are from the University of Washington and Princeton University. Dr. Dunn has published widely in his field, ranging from bioreactor design, process control, animal cell culture, and specialized wastewater treatment. His teaching and research has featured the use of modelling and simulation and has resulted in the publication of three textbooks: Biological Reaction Engineering, Environmental Bioprocesses and Chemical Engineering Dynamics.
Elmar Heinzle chairs Biochemical Engineering at the Saarland University in Saarbrucken, Germany. Having obtained his academic degrees from the Technical University of Graz, Austria, he spent most of his career at the Chemical Engineering Department of ETH-Zurich, Switzerland, before taking his present appointment. Professor Heinzle published over 200 scientific publications in bioreactor design, metabolic engineering, on-line analysis and control and design of sustainable processes. In his teaching in Biochemical and Chemical Engineering he is extensively using modelling. He has authored several books in these fields.
Jonathan B. Snape is Commercial Director of Mylnefield Research Services Ltd, the commercial subsidiary of the Scottish Crop Research Institute, a leading international centre for plant and environmental sciences. Dr Snape studied Biochemistry at the University of Cambridge and Biochemical Engineering at the University of Birmingham before undertaking post-doctoral research in Switzerland, Japan and Germany. His career also encompasses industrial experience with Unilever and IBM and was recently awarded an MBA by the University of Strathclyde.
Jiri E. Prenosil was born 1939 in Prague, Czechoslovakia. Educated in Prague with PhD in Chemical Engineering, he worked in the Czechoslovak Academy of Science and various universities abroad. 1971 he moved to Switzerland with appointment at the Swiss Federal Institute of Technology (ETH) in Zurich. 1984 he was a Visiting Professor at the University of London, Canada. His life interest is in Biochemical Engineering, design and modelling of bioreactors with immobilized biocatalysts. It has resulted in over 100 publications and co-authorship of two other books in this area. He is a co-founder of the renowned International Modelling and Simulation Courses in Braunwald, Switzerland since 1981. 1997 he was granted the Swiss Technology Transfer Award. In 2006, he retired from the ETH.
名人/編輯推薦
"This third edition was terrific pleasure to read! ...The new edition is clearly the result of immense effort and labour of love. Chemical Engineering Dynamics just seems to get better and better." (Current Engineering Practice, October 2007)
目次
Preface.
Nomenclature.
1. Basic Concepts.
1.1 Modelling Fundamentals.
1.2 Formulation of Dynamic Models.
1.3 Chemical Kinetics.
2. Process Dynamics Fundamentals.
2.1 Signal and Process Dynamics.
2.2Time Constants.
2.3 Fundamentals of Automatic Control.
2.4 Numerical Aspects of Dynamic Behaviour.
3. Modelling of Stagewise Processes.
3.1 Introduction.
3.2 Stirred-Tank Reactors.
3.3 Stagewise Mass Transfer.
4. Differential Flow and Reaction Applications.
4.1 Introduction.
4.2 Diffusion and Heat Conduction.
4.3 Tubular Chemical Reactors.
4.4 Differential Mass Transfer.
4.5 Heat Transfer Applications.
4.6 Difference Formulae for Partial Differential Equations.
4.7 References Cited in Chapters 1 to 4.
4.8 Additional Books Recommended.
5. Simulation Tools and Examples of Chemical Engineering Processes.
5.1 Simulation Tools.
5.2 Batch Reactor Examples.
5.3 Continuous Tank Reactor Examples.
5.4 Tubular Reactor Examples.
5.5 Semi-Continuous Reactor Examples.
5.6 Mixing-Model Examples.
5.7 Tank Flow Examples.
5.8 Process Control Examples.
5.9 Mass Transfer Process Examples.
5.10 Distillation Process Examples.
5.11 Heat Transfer Examples.
5.12 Diffusion Process Examples.
5.13 Biological Reaction Examples.
5.14 Environmental Examples.
Appendix.
1. A Short Guide to MADONNA.
2. Screenshot Guide to BERKELEY-MADONNA.
3. List of Simulation Examples.
Subject Index.
Nomenclature.
1. Basic Concepts.
1.1 Modelling Fundamentals.
1.2 Formulation of Dynamic Models.
1.3 Chemical Kinetics.
2. Process Dynamics Fundamentals.
2.1 Signal and Process Dynamics.
2.2Time Constants.
2.3 Fundamentals of Automatic Control.
2.4 Numerical Aspects of Dynamic Behaviour.
3. Modelling of Stagewise Processes.
3.1 Introduction.
3.2 Stirred-Tank Reactors.
3.3 Stagewise Mass Transfer.
4. Differential Flow and Reaction Applications.
4.1 Introduction.
4.2 Diffusion and Heat Conduction.
4.3 Tubular Chemical Reactors.
4.4 Differential Mass Transfer.
4.5 Heat Transfer Applications.
4.6 Difference Formulae for Partial Differential Equations.
4.7 References Cited in Chapters 1 to 4.
4.8 Additional Books Recommended.
5. Simulation Tools and Examples of Chemical Engineering Processes.
5.1 Simulation Tools.
5.2 Batch Reactor Examples.
5.3 Continuous Tank Reactor Examples.
5.4 Tubular Reactor Examples.
5.5 Semi-Continuous Reactor Examples.
5.6 Mixing-Model Examples.
5.7 Tank Flow Examples.
5.8 Process Control Examples.
5.9 Mass Transfer Process Examples.
5.10 Distillation Process Examples.
5.11 Heat Transfer Examples.
5.12 Diffusion Process Examples.
5.13 Biological Reaction Examples.
5.14 Environmental Examples.
Appendix.
1. A Short Guide to MADONNA.
2. Screenshot Guide to BERKELEY-MADONNA.
3. List of Simulation Examples.
Subject Index.
您曾經瀏覽過的商品
購物須知
外文書商品之書封，為出版社提供之樣本。實際出貨商品，以出版社所提供之現有版本為主。部份書籍，因出版社供應狀況特殊，匯率將依實際狀況做調整。
無庫存之商品，在您完成訂單程序之後，將以空運的方式為你下單調貨。為了縮短等待的時間，建議您將外文書與其他商品分開下單，以獲得最快的取貨速度，平均調貨時間為1~2個月。
為了保護您的權益，「三民網路書店」提供會員七日商品鑑賞期(收到商品為起始日)。
若要辦理退貨，請在商品鑑賞期內寄回，且商品必須是全新狀態與完整包裝(商品、附件、發票、隨貨贈品等)否則恕不接受退貨。