相關商品
商品簡介
目次
商品簡介
本書共分6章和2個附錄。第1章是自動控制基礎知識，介紹反饋控制原理、自動控制系統穩定性分析、設計及控制器參數整定；第2章是測量和執行器，包括壓力、液面、流量、溫度的測量和執行閥；第3章是先進控制系統，介紹前饋、比值、串級、自適應和模型預測控制；第4章是計算機控制系統，包括計算機控制基礎、系統結構、PLC、DCS、現場總線以及計算機控制系統通信；第5章是自動控制系統，其中有物理系統建模，控制用的直流電動機，太陽能跟蹤系統，電站控制以及工業機器人；第6章是人工智能技術及應用，包括神經元網絡、模糊邏輯、專家系統以及應用。
本書可作為高等學校自動化及相關專業學生的教材，也可作為自動化科技人員的參考資料。
本書可作為高等學校自動化及相關專業學生的教材，也可作為自動化科技人員的參考資料。
目次
CHAPTER 1 FUNDAMENTALS OF AUTOMATIC CONTROL
1.1 Introduction to Process Control
1.2 What is Feedback and What are Its Effects?
1.3 Stability of Closed-Loop Control Systems
1.4 The Design Process of Control System
1.5 Controller Tuning
CHAPTER 2 MEASUREMENTS AND ACTUATORS
2.1 Pressure Measurements
2.2 Level Measurements
2.3 Flow Measurements
2.4 Temperature Measurement
2.5 Actuators
CHAPTER 3 ADVANCED CONTROL SYSTEMS
3.1 Feedforward and Ratio Control
3.2 Time-Delay Compensation and Inferential Control
3.3 Adaptive Control Systems
3.4 Model Based Predictive Control
3.5 Supervisory Control Systems
CHAPTER 4 COMPUTER CONTROL SYSTEMS
4.1 Fundamentals of Computer Control
4.2 Computer Control System Architecture
4.3 Programmable Controllers
4.4 Distributed Control System (DCS)
4.5 Computer Control System Communications(1)
CHAPTER 5 AUTOMATIC CONTROL SYSTEMS
5.1 Mathematical Modeling of Physical Systems
5.2 DC Motors in Control Systems
5.3 Sun-Seeker System
5.4 Modern Power Systems
5.5 Introduction to Industrial Robots
CHAPTER 6 ARTIFICIAL INTELLIGENCE TECHNIQUES AND APPLICATIONS
6.1 Artificial Intelligence Techniques
6.2 Use Neural Networks for Problem Solving
6.3 Applications of Fuzzy Logic
6.4 Expert systems
6.5 AI in Process Control
APPENDIXES
Appendix 1 Sources of Information in Automatic Control
Appendix 2 總詞匯表 (INDEX)
REFERENCES
1.1 Introduction to Process Control
1.2 What is Feedback and What are Its Effects?
1.3 Stability of Closed-Loop Control Systems
1.4 The Design Process of Control System
1.5 Controller Tuning
CHAPTER 2 MEASUREMENTS AND ACTUATORS
2.1 Pressure Measurements
2.2 Level Measurements
2.3 Flow Measurements
2.4 Temperature Measurement
2.5 Actuators
CHAPTER 3 ADVANCED CONTROL SYSTEMS
3.1 Feedforward and Ratio Control
3.2 Time-Delay Compensation and Inferential Control
3.3 Adaptive Control Systems
3.4 Model Based Predictive Control
3.5 Supervisory Control Systems
CHAPTER 4 COMPUTER CONTROL SYSTEMS
4.1 Fundamentals of Computer Control
4.2 Computer Control System Architecture
4.3 Programmable Controllers
4.4 Distributed Control System (DCS)
4.5 Computer Control System Communications(1)
CHAPTER 5 AUTOMATIC CONTROL SYSTEMS
5.1 Mathematical Modeling of Physical Systems
5.2 DC Motors in Control Systems
5.3 Sun-Seeker System
5.4 Modern Power Systems
5.5 Introduction to Industrial Robots
CHAPTER 6 ARTIFICIAL INTELLIGENCE TECHNIQUES AND APPLICATIONS
6.1 Artificial Intelligence Techniques
6.2 Use Neural Networks for Problem Solving
6.3 Applications of Fuzzy Logic
6.4 Expert systems
6.5 AI in Process Control
APPENDIXES
Appendix 1 Sources of Information in Automatic Control
Appendix 2 總詞匯表 (INDEX)
REFERENCES
您曾經瀏覽過的商品
購物須知
大陸出版品因裝訂品質及貨運條件與台灣出版品落差甚大，除封面破損、內頁脫落等較嚴重的狀態，其餘商品將正常出貨。
特別提醒：部分書籍附贈之內容(如音頻mp3或影片dvd等)已無實體光碟提供，需以QR CODE 連結至當地網站註冊“並通過驗證程序”，方可下載使用。
無現貨庫存之簡體書，將向海外調貨：
海外有庫存之書籍，等候約45個工作天;
海外無庫存之書籍，平均作業時間約60個工作天，然不保證確定可調到貨，尚請見諒。
為了保護您的權益，「三民網路書店」提供會員七日商品鑑賞期(收到商品為起始日)。
若要辦理退貨，請在商品鑑賞期內寄回，且商品必須是全新狀態與完整包裝(商品、附件、發票、隨貨贈品等)否則恕不接受退貨。