商品簡介
目次
1.1 Resistive and Piezoresistive Strain Sensor
1.2 Piezojuncfion Effect
1.3 Piezoelectric Effect
1.4 Capacitive Sensing
1.5 Tunneling Sensing
2 Light Emitter
2.1 Light Emitting Diode
2.2 Silicon Light Emitting Diode
2.3 Organic Light Emitting Diode
2.4 Gas and Solid-State Laser
2.5 Micromachined Solid-State Laser
2.6 Plasma Light Source
2.7 Electroluminescent Light Source
2.8 Field Emission Display
2.9 Bioluminescence
3 Fundamentals of Fiber Optic Component
3.1 Basic of Optic
3.2 The Electromagnetic Spectrum
3.3 Light Guiding
3.4 Fiber Transmission
3.5 Other Optical Component
4 Noninverting Amplifier
4.1 Basic Amplifier
4.2 Voltage Follower
4.3 OP-AMP Application
4.4 Difference Amplifier Pulse Radar
5 Pulse Radar
5.1 Overview of Pulsed Radar
5.2 Critical Subsystem Design and Technology
5.3 Radar Performance Prediction
6 Computer Aided Design and Analysis of Communication System
6.1 Introduction
6.2 The Role of Simulation
6.3 Motivation for the Use of Simulation
6.4 Limitations of Simulation
6.5 Simulation Structure
6.6 The Interdisciplinary Nature of Simulation
6.7 Model Design
6.8 Low-Pass Model
6.9 Pseudorandom Signal and Noise Generator
6.10 Transmitter, Channel and Receiver Modeling
6.11 Symbol Error Rate Estimation
6.12 Validation of Simulation Result
6.13 A Simple Example Illustrating Simulation Product
7 Visible Detector
7.1 Introduction
7.2 The Human Eye as A Detector
7.3 Photographic Film
7.4 Photoelectric Detector
7.5 Photomultiplier
7.6 Photoconductor
7.7 Photodiode
7.8 Pyroelectric Detector
8 Infrared Detector
8.1 Introduction
8.2 Photographic Film
8.3 Photoelectric Detector
8.4 Thermal Detector
8.5 Detection System and Selection Guide
9 Imaging Detector
9.1 Introduction
9.2 Photoemitter
9.3 Imaging Tube
9.4 Solid-State Imaging Device
10 Mechanical Engineering
10.1 Introduction
10.2 Spectrum
10.3 Energy Conversion
10.4 Energy Resource
10.5 Environment and Transportation
10.6 Engineering and Technology Management
10.7 Manufacturing
10.8 Material and Structure
10.9 System and Design
11 Shaft Analysis and Design
11.1 Introduction
11.2 Analysis
11.3 Numerical Example
11.4 Key and Pin
11.5 Effects of Pin Size on Shaft Stress
12 Optimization of Screw Compressor Design
12.1 Introduction
12.2 Geometry of Screw Compressor Rotor
12.3 Compressor Thermodynamics in Optimization Calculation
12.4 Optimization of the Rotor Profile and Compressor Design
12.5 Conclusion
附錄1 電子元器件英漢對照
附錄2 電子部件英漢對照
附錄3 常用數學符號英文表達法
References
主題書展
更多主題書展
更多書展本週66折
您曾經瀏覽過的商品
購物須知
大陸出版品因裝訂品質及貨運條件與台灣出版品落差甚大,除封面破損、內頁脫落等較嚴重的狀態,其餘商品將正常出貨。
特別提醒:部分書籍附贈之內容(如音頻mp3或影片dvd等)已無實體光碟提供,需以QR CODE 連結至當地網站註冊“並通過驗證程序”,方可下載使用。
無現貨庫存之簡體書,將向海外調貨:
海外有庫存之書籍,等候約45個工作天;
海外無庫存之書籍,平均作業時間約60個工作天,然不保證確定可調到貨,尚請見諒。
為了保護您的權益,「三民網路書店」提供會員七日商品鑑賞期(收到商品為起始日)。
若要辦理退貨,請在商品鑑賞期內寄回,且商品必須是全新狀態與完整包裝(商品、附件、發票、隨貨贈品等)否則恕不接受退貨。